Technical Guides

An executable 6-week schedule from drawing review to mass-production SPC, with the deliverables and show-stoppers to check at every gate.

A 20-30% quote spread usually comes from inconsistent scopes, not margins. Break down lighting-cover extrusion cost and the three hidden costs B2B buyers most often miss.

Why a higher transmittance number can push UGR above EN 12464-1 limits, and how to choose PC vs PMMA and prismatic vs opal diffusers by failure mode rather than by datasheet.

How to Develop a Custom LED Diffuser Profile Developing a diffuser profile is a measurement exercise, not a selection exercise. […]

Custom Linear Lighting Profile Manufacturing Linear lighting is the most demanding application for extrusion because length amplifies everything: a small […]

PC vs PMMA for LED Light Covers For light covers the PC-versus-PMMA decision is usually made by compliance rather than […]

How to Reduce Cost in Custom Lighting Extrusion Most of the cost of a custom lighting profile is committed before […]

What Information Should Be Included in a Lighting Profile Drawing? Most tooling rework traces back to one of four missing […]

Custom Lighting Extrusion from Drawing to Production You have a cross-section drawing and an annual quantity. This is what happens […]

How to Design a Custom LED Light Cover A light cover closes the fixture, protects the LEDs, and usually decides […]

How to Choose a Material for LED Diffusers Choosing a diffuser material is a balancing act between two numbers that […]

PMMA Lighting Profile Design Guide PMMA (acrylic) is the optical choice for lighting extrusion: the highest light transmission of the […]