Custom Lighting Extrusion Manufacturer
Profiles developed from your drawing, sample, CAD file or specification – engineered as a lighting component and tooled for production.
Developed from Whatever You Have
Most customers come to us with one of four things: a finished drawing, a CAD file, a sample piece from an existing fitting, or a sketched cross-section with dimensions. All four are workable. The smaller the brief, the more we fill in during engineering – but we would rather start from a sketch than have you delay the project.
| Customer drawings | 2D drawings with dimensions and tolerances - PDF, DWG, DXF |
|---|---|
| Samples | An existing profile piece; we measure, identify material and reproduce the section |
| CAD files | STEP, IGES or native 3D files for direct section extraction |
| Dimensions | Width, height, wall thickness and length per piece |
| Surface requirements | Clear, matte, frosted, prismatic or embossed |
| Optical requirements | Target transmittance, diffusion, beam angle or UGR |
| Material requirements | PC, PMMA, co-extrusion, or a specified grade |
| Application requirements | Where the luminaire is installed and what it must survive |
What we work to
| Material | PC or PMMA, single extrusion or co-extruded |
|---|---|
| Section width | up to 400 mm across the profile |
| Critical die dimensions | ±0.1 mm on the dimensions that carry the fit |
| Transmittance | 0-97% |
| Surface | clear, matte, frosted, embossed or prismatic |
| Colour | 100+ shades matched to RAL or Pantone |
| Minimum order | from 500 pcs per profile |
| Sample to mass production | around 6 weeks, tooling included |
| Production lines | 20+ extrusion and co-extrusion lines |
Custom extrusion means the die is cut for your section. It is not a variant of an existing tool, and it is not a stock profile cut to length.
What happens between the drawing and the first metre
The sequence is short and the order matters. Section review, die design, die manufacture, first-off, approval, production. Around six weeks covers all of it, and the two places it slips are the same two places every time: a section that has not been reviewed for extrudability, and a first-off that was approved against a description rather than a number.
Section review is where cost is set. Wall thickness variation across a section, sharp internal corners, and tolerance called out on dimensions that carry no function all make the die harder and the line slower without improving the part. Most sections can be made cheaper in five minutes at this stage and not at all afterwards.
Co-extrusion is the lever that gets used most. Running two materials through one die – an optical face and a structural body, or a UV-capped surface over a cheaper core – puts material only where it does work. It complicates the die and the first-off check, and it usually removes a part or an assembly step on your line.
First-off is the last gate, and it is a measurement rather than an opinion. Transmission, critical dimensions and colour get checked against the drawing, and a sample is retained. That retained sample is what makes the second order match the first one.
What to put on the drawing
- Section at 1:1 with wall thickness dimensioned separately
- Which dimensions carry the fit – mark them
- Transmittance target as a number at the running wall thickness
- Surface and colour reference
- Annual volume – it sets how the die is built
- Cut length, packing and target date
Where a custom extrusion goes wrong
Four failures account for most of the projects that slip, and three of them are decided before the die is cut.
Wall thickness that varies across the section
Uneven wall cools unevenly and pulls the section out of shape. It is the single most common cause of a first-off that does not fit.
Tolerance where nothing needs it
A blanket tight tolerance forces hand-finished tooling and a slower line. Mark the features that matter.
Approval given against a description
Approving a sample that "looks about right" costs three weeks when the next one is measured against the real target.
Volume not stated
Volume decides die construction and scheduling. Without it, the quote is for a run size nobody agreed to.
Every one of these is cheaper to fix on paper than in steel. We review the section before we quote it for exactly that reason.
From Drawing to Production
- Drawing review – section, tolerances and optical targets checked for extrudability
- Profile engineering – wall thickness, radii and material flow balanced for stable extrusion
- Material selection – PC, PMMA, co-extrusion or a specified compound
- Tooling design – extrusion die designed for your section
- Mould manufacturing – die and calibration tooling machined
- Prototype – first-off sections produced for your approval
- Extrusion – production run on a matched extrusion line
- Cutting – cut to length, drilled, notched or machined as required
- Inspection – dimension, appearance and optical checks before release
- Packaging – protective film, bundles and cartons to your specification
Frequently Asked Questions
Upload your drawing
Or email your drawing to info@leddiffuserfactory.com · WhatsApp +37259205909 · WeChat +8615867897761
Compliance: ISO 9001:2015, UL 94 ratings, the SGS RoHS report and the PAH statement we hold.